標題: but if were a U Joint wouldn't I hear metal scraping all the time [打印本頁] 作者: nowleldz 時間: 2015-10-30 02:32 標題: but if were a U Joint wouldn't I hear metal scraping all the time
4x4 Turned on but Front Wheels Not Engaging
1999 Ford Ranger XLT 4x4 off road 4.0L
When I engage the 4x4 through the electronic switch the electric motor on the transfer case DOES engage the 4H and 4L, I know the electric selinoid is working, Polo Ralph Lauren Sale Uk however I do not get Timberland Outlet Uk any power to the Cheap Nike Air Max Uk front wheels. I notice a metal on metal scraping noise coming from under the vehicle, I can't tell if its coming from the transfer case or the front end of the vehicle. I used the 4x4 all winter and at some point it stopped working, I am not just sure when. All I know is that I have no power being tansfered to the front end and I have a scrapping noise. I had a vaccum leak repaired Cheap Nike Sb Uk a few years back and I haven't had that kind of problem since." Check the U Joint. If it's good you need to look inside the pumpkin! Or pull the wheels off and check the Nike Free Run 3 Uk cheap plastic stuff at the wheels! Merlin2021
No offense Merlin, but if were a U Joint wouldn't I hear metal scraping all the time? I only here metal on metal when I turn the 4H or 4L on. I can be driving in 2H perfectly with no noise or scraping sound and then switch to 4H(shift on the fly). Then I get no power to the front wheels and the scraping noise starts. Then I switch back to 2H(shift on the fly again) and the scraping noise stops and throughout the whole time I got no front end power.
